SNMP Configuration and Management Manual

TCP/IP Subagent
SNMP Configuration and Management Manual—424777-006
8-104
1022: ZTSA-EVT-PIFGETSTATUS-ERROR
ZTSA-EVT-PIFGETSTATUS-ERROR
is the event number (1022). The DDL AS clause of this value
(“LM_Get_Status_error-on-PIF”) appears in the message text following “event
number.”
ZTSA-VAL-TF-PIFGETSTATUS
identifies the type of transient fault that occurred. For this event, the DDL heading
of the value (“PIF-status-cmd-not-completed”) appears in the message text
following “fault type.”
ZEMS-VAL-NULL
indicates the type of subsystem-defined event. Because the TCP/IP Subagent
process has not defined this as a private event, the DDL AS clause “undefined”
always appears in the message text following “user content.”
Cause. The LM_Get_Status_ function returned an error for the PIF.
Effect. The ifTable values obtained through the STATUS command are not current
until the timer expires, the same ZLANMSRL call is retried, and a response obtained.
Recovery. Generally, this condition is transient, and no corrective action is necessary.
If the problem persists, contact your service provider and provide all relevant
information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message or messages generated
•
Supporting documentation such as Event Management Service (EMS) logs
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
Sample Message
98-04-08 11:31:35 \NOVA.$ZTSA TANDEM.TCPIPSA.G05 001022 Transient
Fault TCP/IP-SNMP-Subagent -
\NOVA.$ZTSA:3693561,
event number: LM_Get_Status_error-on-PIF,
fault type: PIF-status-cmd-not-completed,
user content: undefined