SNMP Configuration and Management Manual

EMS Trap Subagent
SNMP Configuration and Management Manual—424777-006
9-15
The EMS Trap MIB
trapSubject
1.3.6.1.4.1.169.3.12.4)
not-accessible
DisplayString (SIZE
(1..50))
The hardware or
software component
most directly involved
in the event.
All values except
floating-point values and
values stored as
structured tokens can be
formatted. A question
mark (?) appears when
the value of the subject
cannot be formatted.
The value of the first
event subject token.
trapProcess
1.3.6.1.4.1.169.3.12.5
not-accessible
DisplayString (SIZE
(1..50))
The process
descriptor of the
process reporting the
event.
For a named process:
node-
name.process-
name.sequence-
number
For an unnamed
process:
node-name.
$:cpu:pin:sequence-
number
node-name identifies
the system on which the
process resides.
process-name is the
name assigned at startup
time, of the form $name,
where name has from
one through five
characters.
sequence-number is
an integer used to
distinguish among
different instances of a
process.
cpu:pin is a process
ID consisting of a
processor module
number (cpu) and a
processor identification
number (pin).
ZEMS-TKN-PROC-
DESC token value.
trapGenerationtime
1.3.6.1.4.1.169.3.12.6
not-accessible
DisplayString (SIZE
19)
The time when the
event was generated.
YYYY/MM/DD
HH:MM:SS.
ZEMS-TKN-
GENTIME token
value.
Table 9-1. Objects in the EMS Trap MIB (page 3 of 4)
Object and Attributes Definition Format of Value Derivation of Value