SNMP Configuration and Management Manual

Host Resources Subagent

SNMP Configuration and Management Manual—424777-006

11-28

RFC Compliance

hrSystem Group Maintenance

The values of the hrSystem group MIB objects are initialized at subagent startup time

and then refreshed at a frequency controlled by the -s and -d startup parameters:

The values of these objects can be refreshed on demand from an SNMP manager

after the subagent is running. Values associated with the -s startup parameter are

refreshed by setting the value of zhrmStableRefreshNow in the zhrmRefresh group.

Values associated with the -d startup parameter are refreshed by setting the value of

zhrmDynamRefreshNow in the zhrmRefresh group.

When values of hrSystem group objects are refreshed, values for objects in the

hrSWRun and hrSWRunPerf groups are also refreshed.

The values of hrSystemDate and hrSystemUpTime are also updated each time these

objects are accessed in response to a manager request.

Table 11-3. Compliance With hrSystem Group Definitions in RFC 1514

Object Descriptor Compliance Explanation

hrSystemUpTime Yes See Table 11-2

hrSystemDate Partial Set operation not supported.

hrSystemInitialLoadDevice Partial Set operation not supported.

hrSystemInitialLoadParameter

Partial Set operation not supported.

hrSystemNumUsers Yes See Table 11-2

hrSystemProcesses Yes See Table 11-2

hrSystemMaxProcesses Yes See Table 11-2

hrSystemDate

hrSystemInitialLoadDevice

hrSystemInitialLoadParameters

hrSystemMaxProcesses

hrSystemUpTime

hrSystemNumUsers

hrSystemProcesses