SNMP Configuration and Management Manual

Host Resources Subagent
SNMP Configuration and Management Manual—424777-006
11-40
MIB Objects
hrDeviceDescr
1.3.6.1.2.1.25.3.2.1.3
read-only
DisplayString
(SIZE (0..64))
Description of the
type of device
represented by the
entry.
CPUs: CPUnn
(CPU--type).
Printers: collector
name of form
$printer-id.
Spooler collectors,
used as pseudo
printers, have name
form [\node--
name]$collector-
process- name
[.#group-name].
Disks: name and type
of the disk: $volume
(disk-type).
For CPUs: Guardian
procedure
PROCESSOR_
GETINFOLIST_.
For printers: Spooler
procedure
SPOOLERSTATUS2.
For disks and tape drives:
Guardian procedures
DEVICE_
GETINFOBYLDEV_
and FILE_
GETINFOBYLISTNAME_
Tapes: $tape-
drive-name.
Network devices:
$network-
devicedrive-name.
OSS:$disk-
fileset .
Loopback device:
$NOIOP.
hrDeviceID
1.3.6.1.2.1.25.3.2.1.4
read-only
ProductID
An identifier
characterizing the
entry as a particular
device type and
subtype.
The root of the
identifier is the same
for all entries:
1.3.6.1.4.1.169.3.180.
Appended to this
value are the type
and subtype values.
For example, the
hrDeviceID for a
4500 (1038-MB
formatted capacity
per spindle) disk
would look like this:
1.3.6.1.4.1.169.3.180.
3.22.
The product ID for a
device is a concatenation
of the product ID of the
Host Resources
Subagent subsystem and
the device type and
subtype. For processor
type, the device type is
set to 0.
Refer to the Guardian
Procedure Calls
Reference Manual for
a complete list of all
device types and
complete list of all
device types and
subtypes.
Table 11-6. hrDevice Group Objects Supported by Host Resources Subagent’s
MIB (page 2 of 9)
Object and Attributes Definition Format of Value Derivation of Value