SNMP Configuration and Management Manual

Host Resources Subagent
SNMP Configuration and Management Manual—424777-006
11-59
hrSWRunPerf Group
You control whether the subagent creates or maintains hrSWRun group objects by
using the -w startup parameter or, after startup, by setting the value of
zhrmEnableSoftwareGroup in the zhrmSaProcess group:
•
Use the -w startup parameter to suppress creation of hrSWRun group objects.
Omit the -w startup parameter to enable object creation.
•
Set zhrmEnableSoftwareGroup to 0 to disable maintenance of hrSWRunGroup
objects. Set it to 1 to enable object maintenance.
hrSWRunPerf Group
The hrSWRunPerf group consists of one table (the hrSWRunPerfTable), which
contains one entry for each entry in the hrSWRunTable in the hrSWRun group. The
objects in the hrSWRunPerf group describe the CPU and memory utilization of
processes running on the host. The Host Resources Subagent’s MIB supports the
objects identified by a check mark in the following list:
iso (1)
identified-organization (3)
dod (6)
internet (1)
mgmt (2)
mib-2 (1)
host (25)
hrSWRunPerf (5) √
hrSWRunPerfTable (1) √
hrSWRunPerfEntry (1) √
hrSWRunPerfCPU (1) √
hrSWRunPerfMem (2) √
MIB Objects
Table 11-10 describes how the Host Resources Subagent supports objects in the
hrSWRunPerf group.