SNMP Configuration and Management Manual

Trap Multiplexer Subagent/Manager
SNMP Configuration and Management Manual—424777-006
12-18
MIB Objects
ztmxProcPri
1.3.6.1.4.1.169.3.185.2.9
read-write
INTEGER
The priority of the
Trap Multiplexer
primary and
backup
processes.
Integer without leading 0s. Initially, the value of
the -n startup
parameter (145 or a
user-specified value).
After startup, the
value can be set from
an SNMP manager.
ztmxProcHomeTerm
1.3.6.1.4.1.169.3.185.2.10
read-only
DisplayString
The name of the
terminal from
which the Trap
Multiplexer was
started.
\node.$device-name.
#subdevice-name
Guardian procedure
PROCESS_GETINFO
_.
ztmxProcHeapInitial
1.3.6.1.4.1.169.3.185.2.11
read-only
Gauge
The number of
bytes of memory
buffer space
allocated at Trap
Multiplexer
startup.
Integer without leading 0s. Internal library
routine.
ztmxProcHeapCurrent
1.3.6.1.4.1.169.3.185.2.12
read-only
Gauge
The number of
bytes of memory
buffer space
currently in use
by the Trap
Multiplexer.
Integer without leading 0s. Internal library
routine.
ztmxProcEmsCollector
1.3.6.1.4.1.169.3.185.2.13
read-only
DisplayString
The name of the
EMS collector
process to which
event messages
are being sent.
\node.$volume.
subvolume.process
The name specified in
the -c startup
parameter. If not
specified, the name
$0.
ztmxProcAgent
1.3.6.1.4.1.169.3.185.2.14
read-only
DisplayString
The name of the
Nonstop agent
process the Trap
Multiplexer is
communicating
with.
\node.$volume.
subvolume.process
The name specified in
the -a startup
parameter. If not
specified, the name
$ZSNMP.
Table 12-3. ztmxProcess Group Objects Supported by Trap Multiplexer’s
MIB (page 2 of 4)
Object and Attributes Definition Format of Value Derivation of Value