SNMP Configuration and Management Manual

Trap Multiplexer Subagent/Manager
SNMP Configuration and Management Manual—424777-006
12-41
101: ZTMX-EVT-TMX-TERMINATED
ZTMX-VAL-CR-reason
is one of the causes following below. The DDL AS clause associated with this
value is inserted in the message text following “cause:”
ZTMX-VAL-TMX-STARTED
is the previous state. The DDL AS clause of this value (“started”) appears in the
message text following “previous state:”
ZTMX-VAL-TMX-DEFINED
is the current state. The DDL AS clause of this value (“not-running”) appears in the
message text following “current state:”
ZEMS-TKN-CONTENT-USER
is assigned the value “undefined” in the message text following “user content:”
Cause. The Trap Multiplexer process terminated normally. (Abnormal termination is
reported by the operating system.)
Effect. The backup process of the NonStop process pair should take over. If recovery
is successful, an event announcing the takeover is generated.
Recovery. Examine the event logs for related events. Often event message 103
(ZTMX-EVT-TMX-IO-ERR) is generated prior to this event; refer to the message
contents for a description of the associated problem. If you can determine the cause of
the termination, correct it and, if necessary, restart the Trap Multiplexer process. If the
termination resulted from incorrect specification of the agent process name, rerun the
Trap Multiplexer using the -a startup parameter to specify the proper name.
Value of ZEMS-TKN-CHANGE-REASON Associated Text (DDL AS clause)
ZTMX-VAL-CR-PROCESS-SIGILL "Instruction-failure"
ZTMX-VAL-CR-PROCESS-SIGABRT "Process-aborted"
ZTMX-VAL-CR-PROCESS-SIGFPE "Arithmetic-overflow"
ZTMX-VAL-CR-PROCESS-SIGSEGV "Illegal-address-reference"
ZTMX-VAL-CR-PROCESS-SIGSTK "Stack-overflow"
ZTMX-VAL-CR-PROCESS-SIGTIMEOUT "Loop-timer-timeout"
ZTMX-VAL-CR-PROCESS-SIGTERM "Termination-request"
ZTMX-VAL-CR-PROCESS-STOPPED "Process-stopped"
ZTMX-VAL-CR-PROCESS-NOMEM "Memory-Space-Exhausted"