SNMP Configuration and Management Manual

Trap Multiplexer Subagent/Manager
SNMP Configuration and Management Manual—424777-006
12-43
103: ZTMX-EVT-TMX-IO-ERR
ZTMX-VAL-TMX-STARTED
is the current state. The DDL AS clause of this value (“started”) appears in the
message text following “current state:”
ZEMS-TKN-CONTENT-USER
is assigned the value “undefined” in the message text following “user content:”
Cause. The Trap Multiplexer process has started.
Effect. The process is ready for service.
Recovery. Informational message only; no corrective action is needed.
Sample Message
96-07-26 11:34:51 \COMM.$ZTMX TANDEM.TRAPMUX.D31 000102 Object
available SNMP-Trap-Multiplexer -
\COMM.$ZTMX, event number:
Process-Started, reason: Process-started,
previous state: not-running, current
state: started, user content: undefined
103: ZTMX-EVT-TMX-IO-ERR
The Trap Multiplexer process encountered an I/O error.
ZTMX-TKN-SUBJ-TMX
identifies the subject of the event (always the Trap Multiplexer process). The DDL
heading of this token (“SNMP-Trap-Multiplexer”) and the token’s value (the name
of the process) are inserted in the message text.
Unconditional Tokens
ZTMX-TKN-SUBJ-TMX
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-TXFAULT-TYPE
Value
<1> Trap Multiplexer process
name
<2> ZTMX-EVT-TMX-IO-ERR
<3> ZTMX-VAL-TF-IO
Conditional Tokens
ZTMX-TKN-FS-ERR
ZTMX-TKN-FILE-NAME
ZTMX-TKN-ERR-TEXT
Value
<4> error code and subcode
<5> file name
<6> descriptive text
Message Text
Transient Fault - SNMP-Trap-Multiplexer <1>, event number:
<2>, fault type: <3>, FS error: <4>, subcode: <4>, File Name:
<5>, Additional Info: <6>