SNMP Configuration and Management Manual

Trap Multiplexer Subagent/Manager
SNMP Configuration and Management Manual—424777-006
12-45
104: ZTMX-EVT-TMX-NO-MEM-SPACE
Sample Message
96-07-26 11:48:59 \COMM.$ZTMX TANDEM.TRAPMUX.D31 000103 Transient
Fault - SNMP-Trap-Multiplexer \COMM.$ZTMX,
event number: Process-I/O-error, fault
type: IO-error, FS error: 4013 -- subcode:
0, File Name: $ZTC0, Additional Info:
Cannot bind to port
104: ZTMX-EVT-TMX-NO-MEM-SPACE
The Trap Multiplexer process ran out of memory.
ZTMX-TKN-SUBJ-TMX
identifies the subject of the event (always the Trap Multiplexer process). The DDL
heading of this token (“SNMP-Trap-Multiplexer”) and the token’s value (the name
of the process) are inserted in the message text.
ZTMX-EVT-TMX-NO-MEM-SPACE
is the event number (1044). The DDL AS clause of this value (“Process-No-
Memory-Space”) is inserted in the message text following “event number:”
ZTMX-VAL-TF-MEM
identifies the type of transient fault that occurred. For this event, the DDL heading
of the value (“Memory-full”) is inserted in the message text.
Cause. The Trap Multiplexer process ran out of memory. The most likely cause is a
problem of internal resource management.
Effect. This error might prevent a part of the Trap Multiplexer from functioning. The
Trap Multiplexer might be able to correct the situation or might subsequently fail. In the
latter case, additional events would be generated.
Unconditional Tokens
ZTMX-TKN-SUBJ-HRM-SA
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-TXFAULT-TYPE
Value
<1> Trap Multiplexer process
name
<2> ZTMX-EVT-TMX-NO-MEM-SPACE
<3> ZTMX-VAL-TF-MEM
Conditional Tokens
None
Message Text
Transient Fault - SNMP-Trap-Multiplexer <1>, event number:
<2>, fault type: <3>