SNMP Configuration and Management Manual

IPX/SPX Subagent (G-Series)
SNMP Configuration and Management Manual—424777-006
13-40
zisa Group
tdmNwSaBackupStateReason
1.3.6.1.4.1.169.3.196.1.1.9
read-only
INTEGER {
rowcreate (1),
operatorrequest (2),
subagentkeepalive (3),
invalidprocessname (4),
incorrectprocessname (5),
resourceproblem (6)}
The reason for the
value of tdmNwSa-
BackupState.
One of the values shown
in the first column.
tdmNwSaSwitchToBackupNow
1.3.6.1.4.1.169.3.196.1.1.10
read-write
INTEGER {
autoProcessPairControl (1),
forceBackupTakeover (2)}
A switch that
causes the
subagent’s backup
process to take over
when set to 2.
The value retrieved is
always 1. When you set
the value to 2, an SNMP
genErr is sent to the
requesting manager,
even though the backup
process actually takes
over.
tdmNwSaEmsCollectorName
1.3.6.1.4.1.169.3.196.1.1.11
read-write
DisplayString (SIZE (0..20))
The process name
of the EMS collector
to which the
subagent sends its
EMS events.
[\system.]$ems-
collector, where
system and ems-
collector are
alphanumeric strings
starting with a letter. The
default value is $0, but it
can be changed with the -
c startup parameter or
from a manager.
tdmNwSaEmsCollectorState
1.3.6.1.4.1.169.3.196.1.1.12
read-write
INTEGER {
disconnected (1),
connected (2)}
The state of the
connection with the
EMS collector
process.
One of the values shown
in the first column.
tdmNwSaEmsCollectorStateReason
1.3.6.1.4.1.169.3.196.1.1.13
read-only
INTEGER {
rowcreate (1),
operatorrequest (2),
subagentkeepalive (3),
invalidprocessname (4),
incorrectprocessname (5),
resourceproblem (6)}
The reason for the
value of
tdmNwSaEms-
CollectorState.
One of the values shown
in the first column.
Table 13-9. tdmNwSaConfig Objects Supported by the Subagent (page2of3)
Object and Attributes Definition Description of Value