SNMP Configuration and Management Manual

IPX/SPX Subagent (G-Series)
SNMP Configuration and Management Manual—424777-006
13-44
zisa Group
zisa Group Table Maintenance
The subagent creates an entry in the tdmNwSaAgentNamesTable when a SNMP agent
connection is configured. It creates an entry in the tdmNwSaIPXPROTONamesTable
when an IPXPROTO process connection is configured. SNMP agent and IPXPROTO
connections are configured by using the -a and -i startup parameters, respectively, or
by setting the value of tdmNwSaAgentName or tdmNwSaIpxProtoName, respectively.
When the subagent starts, it establishes connections with IPXPROTO and SNMP
agent processes named in the startup line and sets the value of their MIB state objects
to connected if a connection could be established. After startup, you can establish
additional process connections by adding entries to the
tdmNwSaIPXPROTONamesTable and the tdmNwSaAgentNamesTable:
If you do not set the state object associated with a new entry to connected, the
subagent attempts to establish a connection when its keep-alive timer runs down.
Entries in the zisa group tables cannot be deleted; to deactivate an entry, set the value
of its state object to disconnected.
Values in the zisa group tables are updated whenever an event occurs that causes
them to change.
tdmNwSaIpxProtoStateReason
1.3.6.1.4.1.169.3.196.1.3.1.4
read-only
INTEGER {
rowcreate (1),
operatorrequest (2),
subagentkeepalive (3),
invalidprocessname (4),
incorrectprocessname (5),
resourceproblem (6)}
The reason for the
value of tdmNwSaIpx-
ProtoState.
One of the values in
the first column.
Process SNMP Operation
IPXPROTO process Add an entry to the tdmNwSaIPXPROTONamesTable, setting
the value of tdmNwSaIpxProtoName to the IPXPROTO process
name.
SNMP agent process Add an entry to the tdmNwSaAgentNamesTable, setting the
value of tdmNwSaAgentName to the SNMP agent process
name.
Table 13-11. tdmNwSaIPXPROTONamesEntry Objects Supported by the
Subagent (page 2 of 2)
Object and Attributes Definition
Description of
Value