SNMP Configuration and Management Manual

IPX/SPX Subagent (G-Series)
SNMP Configuration and Management Manual—424777-006
13-57
1004: ZISA-EVT-AGENT-UNAVAILABLE
Effect. The subagent cannot receive requests or transmit responses using the SNMP
agent process.
Recovery. Correcting the situation depends on the reason for the disconnection:
Sample Message
96-01-30 16:50:50 \COMM.$ZISA TANDEM.IPXSA.D30 001004 Object
unavailable agent-resource-object - $ZSNMP,
event number: agent-unavailable, cause:
resource-problem, previous state: connected,
current state: disconnected, user content:
undefined
invalid-processname A Set operation on tdmNwSaAgentName specified a
syntactically incorrect value.
incorrect-processname A SNMP agent process was stopped, and a non-agent
process by the same name was started. When the subagent
attempted to reconnect with the stopped agent process, the
name of the process running did not identify a SNMP agent
process.
resource-problem A SNMP agent process failed.
Change Reason Recovery
operatorrequest No action is required because the stoppage was deliberate.
invalid-processname Resubmit the Set request using the correct syntax for a
NonStop Kernel process name.
incorrect-processname Start a SNMP agent process using a unique process name.
resource-problem Try to set the value of tdmNwSaAgentState to connected.
If the operation fails, refer to Section 7, Troubleshooting the
SNMP Agent, for other ideas.
Change Reason Cause