SNMP Configuration and Management Manual

IPX/SPX Subagent (G-Series)
SNMP Configuration and Management Manual—424777-006
13-73
1012: ZISA-EVT-PROCESS-TRAPPED
ZISA-VAL-CR-reason
is the change reason, which is one of the following values:
Cause. The subagent process trapped.
Effect. The subagent process stops.
Recovery. If the trap occurred in the primary process, any existing backup process
takes over, so no recovery is needed. If a backup process was not running, try
restarting the subagent. Regardless of whether the subagent is able to recover,
contact your service provider and provide all relevant information as follows:
•
Descriptions of the problem and accompanying symptoms
•
Details from the message or messages generated
•
Supporting documentation such as EMS logs
If your local operating procedures require contacting the GCSC, supply your system
number and the numbers and versions of all related products as well.
Sample Message
96-01-30 16:50:50 \COMM.$ZISA TANDEM.IPXSA.D30 001012 Transient Fault
IPX/SPX-SNMP-subagent-process - \COMM.$ZISA,
event number:process-trapped,
fault type: Internal-error, user content:
undefined
Token Value DDL AS Clause
ZISA-VAL-CR-PROCESS-SIGILL “Instruction-failure”
ZISA-VAL-CR-PROCESS-SIGABRT “Process-aborted”
ZISA-VAL-CR-PROCESS-SIGFPE “Arithmetic-overflow”
ZISA-VAL-CR-PROCESS-SIGSEGV “Illegal-address-reference”
ZISA-VAL-CR-PROCESS-SIGSTK “Stack-overflow”
ZISA-VAL-CR-PROCESS-SIGTIMEOUT “Loop-timer-timeout”
ZISA-VAL-CR-PROCESS-SIGTERM “Termination-request”
ZISA-VAL-CR-PROCESS-SIGNOMEM “Memory-space-exhausted”