SNMP Configuration and Management Manual

Ethernet Subagent
SNMP Configuration and Management Manual—424777-006
14-13
ZESA MIB Objects
zesaProcessUserID
1.3.6.1.4.1.169.3.217.8
read-only
INTEGER (0..255)
The NonStop Kernel
process user ID part of
the process access ID
(PAID) for the Ethernet
Subagent process.
user-ID-number
zesaPrimaryCPU
1.3.6.1.4.1.169.3.217.9
read-only
INTEGER (0..255)
The number of the
processor in which the
primary Ethernet
Subagent process is
running.
cpu-number
zesaPrimaryPIN
1.3.6.1.4.1.169.3.217.10
read-only
INTEGER (0..255)
The process
identification number
(PIN) of the primary
Ethernet Subagent
process.
PIN-number
zesaBackupCPU
1.3.6.1.4.1.169.3.217.11
read-write
INTEGER (0..255)
The number of the
processor in which the
backup process will start
or is running.
cpu-number specified for the -b
startup parameter. After startup, the
value can be set by an SNMP
manager.
A value of -1 indicates the backup is
not configured.
Setting this object is permitted only if
zesaBackupState is set to disabled
(3). Once zesaBackupCPU has been
set to a new value, zesaBackupState
must be set to enabled (4) for the
new value to take effect.
zesaBackupPIN
1.3.6.1.4.1.169.3.217.12
read-only
INTEGER (0..255)
The process
identification number
(PIN) of the backup
Ethernet Subagent
process.
PIN-number
A value of -1 indicates that the
backup is not running.
zesaBackupState
1.3.6.1.4.1.169.3.217.13
read-write
INTEGER
The state of the
Ethernet Subagent
backup process.
Following are valid states for the
backup process:
connected (1)
disconnected (2)
disabled (3)
enabled (4)
This value can be set with an SNMP
request as illustrated by the state
change diagram in Figure 14-2
on
page 14-18.
Table 14-3. Private (ZESA) MIB Objects Supported by the Ethernet
Subagent (page 2 of 5)
Object and Attributes Definition Format and Derivation of Value