SNMP Configuration and Management Manual

Ethernet Subagent
SNMP Configuration and Management Manual—424777-006
14-15
ZESA MIB Objects
zesaRefreshNow
1.3.6.1.4.1.169.3.217.18
read-write
INTEGER
A means of forcing an
update of the MIB tables
and generating traps (if
needed).
One of these values:
autoDynamicRefresh (0)
forceDynamicRefresh (1)
This object normally reads 0,
indicating that the MIB values are
refreshed at the rate indicated by the
value of the zesaRefreshTImer
Setting this object to 1 causes the
subagent to update the MIB tables
and generate traps (if needed). The
object returns a value of 1 until the
refresh is complete.
zesaRefreshTimer
1.3.6.1.4.1.169.3.217.19
read-write
INTEGER (0..32000)
The cache update
interval (in seconds) for
MIB objects.
A value in the range 0 to 32000
specified for the -r startup parameter.
The default is 60 seconds. After
startup, the value can be set by an
SNMP manager.
Value 0 disables cache timing so that
updates occur to objects only when
zesaRefreshNow is set to
forceDynamicRefresh (1).
zesaTcpIpProcess
1.3.6.1.4.1.169.3.217.20
read-write
DisplayString
(SIZE (0..15))
The name of the TCP/IP
process whose Ethernet
interfaces are being
monitored by the
subagent.
$tcpip-process specified for the
-t startup parameter. The default is
$ZTC0. After startup, the value can
be set by an SNMP manager.
Setting this object is permitted only if
zesaTcpIpState is disabled (3).
Table 14-3. Private (ZESA) MIB Objects Supported by the Ethernet
Subagent (page 4 of 5)
Object and Attributes Definition Format and Derivation of Value