SNMP Configuration and Management Manual

Ethernet Subagent
SNMP Configuration and Management Manual—424777-006
14-19
Ethernet-Like Statistics dot3Group
3. Set the value of the resource object’s associated state object to “Enabled.”
When the state object has been placed in the “Enabled” state, the Ethernet Subagent
attempts to connect to the underlying process.
•
If the connection attempt is successful, the object enters the “Connected” state.
•
If the connection attempt fails, the object enters the “Disconnected” state. The
Ethernet Subagent continues to attempt to reconnect at the rate specified for the
zesaKeepAliveTimer object.
Ethernet-Like Statistics dot3Group
The Ethernet Subagent supports the dot3StatsTable within the dot3 Ethernet-like
Statistics group, as defined in RFC 1643, Definitions of Managed Objects for the
Ethernet-like Interface Types.
iso (1)
identified-organization (3)
dod (6)
internet (1)
mgmt (2)
mib-II (1)
.
.
transmission (10)
.
.
dot3 (7)
dot3StatsTable (2)
dot3StatsEntry (1)
dot3StatsIndex (1)
dot3StatsAlighmentErrors (2)
dot3StatsFCSErrors (3)
dot3StatsSingleCollisionFrames (4)
dot3StatsMultipleCollisionFrames (5)
dot3StatsSQETestErrors (6)
dot3StatsDeferredTransmissions (7)
dot3StatsLateCollisions (8)
dot3StatsExcessiveCollisions (9)
dot3StatsInternalMacTransmitErrors (10)
dot3StatsCarrierSenseErrors (11)
dot3StatsFrameTooLongs (13)
dot3StatsInternalMacReceiveErrors (16)
dot3StatsEtherChipSet (17)