SNMP Configuration and Management Manual

Ethernet Subagent
SNMP Configuration and Management Manual—424777-006
14-27
RFC Compliance
RFC Compliance
Table 14-6 summarizes compliance of Interfaces group support with RFC 1643.
Table 14-6. Compliance With dot3 Group Definitions in RFC 1643
Object Descriptor Compliance Explanation
dot3StatsIndex Yes See Table 14-5
.
dot3StatsAlignmentErrors Yes See Table 14-5
.
dot3StatsFCSErrors Yes See Table 14-5
.
dot3StatsSingleCollisionFrames Partial See Table 14-5
(dot3StatsSingleCollisionFrames is
supported for GESA, E4SA, and
G4SA.)
dot3StatsMultipleCollisionFrames Partial See Table 14-5
(dot3statsMultipleCollisionFrames is
supported for GESA and G4SA.)
dot3StatsSQETestErrors Partial See Table 14-5
.
(dot3StatsSQETestErrors is
supported for E4SA and G4SA.)
dot3StatsDeferredTransmissions Yes See Table 14-5
.
dot3StatsLateCollisions Yes See Table 14-5
.
dot3StatsExessiveCollisions Yes See Table 14-5
.
dot3StatsInternalMacTransmitErrors Partial See Table 14-5
.
dot3StatsCarrierSenseErrors Yes See Table 14-5
.
dot3StatsFrameTooLongs Yes See Table 14-5
.
dot3StatsInternalMacReceiveErrors Partial No corresponding HP
instrumentation exists; 0 is returned
when the object is accessed.
(dot3StatsInternalMacReceiveErrors
is not supported for E4SA, GESA
and G4SA interfaces.)
dot3StatsEtherChipSet Partial No corresponding HP
instrumentation exists; NULL is
returned when the object is
accessed. (dot3StatsEtherChipSet
is not supported for E4SA, GESA
and G4SA Interfaces.)