SNMP Configuration and Management Manual

Ethernet Subagent
SNMP Configuration and Management Manual—424777-006
14-34
3001: ZESA-EVT-SUBAGENT-AVAIL
•
The cause of the event, the conditions that prompted the Ethernet Subagent to
generate the event message.
•
The effects associated with or resulting from the cause.
•
Recovery procedures for solving the problem reported by the event message.
•
An example of the formatted message.
3001: ZESA-EVT-SUBAGENT-AVAIL
The Ethernet Subagent process has completed process initialization after initial startup
or after a takeover by the backup process.
ZESA-TKN-SUBAGENT
identifies the subject of the event (the Ethernet Subagent process). The DDL
heading of this token (“Ethernet-SNMP-subagent”) is inserted in the message text
following “Object available.”
zesaProcessName
is the Ethernet Subagent process name specified for the subagent’s
zesaProcessName MIB object.
ZESA-EVT-SUBAGENT-AVAIL
is the event number (3001). The DDL AS clause of this value (“subagent-process-
available”) appears in the message text following “event number.”
Unconditional Tokens
ZEMS-TKN-SUBJECT-MARK
ZESA-TKN-SUBAGENT
ZEMS-TKN-EVENTNUMBER
ZEMS-TKN-CHANGE-REASON
ZEMS-TKN-STATE-PREVIOUS
ZEMS-TKN-STATE-CURRENT
ZEMS-TKN-CONTENT-USER
Value
<1> ZESA-TKN-SUBAGENT
<2> zesaProcessName
<3> ZESA-EVT-SUBAGENT-AVAIL
<4> ZEMS-VAL-reason
<5> ZESA-VAL-STATE-DISCONNECTED
<6> ZESA-VAL-STATE-CONNECTED
<7> ZEMS-VAL-NULL
Conditional Tokens
None
Message Text
Object available <1>-<2>, event number: <3>, reason: <4>,
previous state: <5>, current state: <6>, user content: <7>