SNMP Configuration and Management Manual

Unsolicited SNMP Agent Messages
SNMP Configuration and Management Manual—424777-006
C-2
Events
Events
Event messages are sent to the EMS collector specified when starting the SNMP
agent or to the EMS collector assigned through SCF by altering the PROCESS object.
By default, event messages are sent to $0 on the local node. You can suppress
sending event messages with the COLLECTOR startup parameter. Configuring the
EMS collector is described in Section 2, Installing and Configuring the SNMP Agent..
Table C-2 summarizes and the following pages describe event messages the SNMP
agent generates.
Table C-2. SNMP Agent Event Messages
Event
Number
Symbolic Name
(ZSMP-EVT-event) Description
001 INVALID-CAID The SNMP agent process has a creator
accessor ID (CAID) that does not belong to
the super user group.
002 INTERNAL-ERROR An internal program fault was detected.
003 STATE-CHANGE The state of a SNMP agent object changed.
004 OSS-ERROR The SNMP agent process was unable to
either decode an SNMP request or encode
an SNMP response.
005 SOCKET-ERROR An error occurred when the SNMP agent
was communicating with HP TCP/IP
software through the sockets library.
006 EVT-CONFIG-ERROR The SNMP agent was started with an
incorrect configuration parameter.
009 BAD-IPC-PDU-RCVD A message received from a subagent
contained an error. One cause for an error
is the incorrect installation of the
ZSMPTMPL template file.
010 BAD-NMS-PDU-RCVD A message received from an SNMP
manager contained an error, such as an
invalid object identifier.
012 NO-SUCH-TRAPDEST A subagent process tried to send a trap to
a trap destination that was not configured
within the SNMP agent.
013 INVALID-PDU-ON-SVC-PNT A subagent process has incorrectly opened
the agent for the service requested.
014 GUARDIAN-ERROR An error was returned in response to a
Guardian procedure call issued by the
SNMP agent.