Manualshelf

SNMP Configuration and Management Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
71727374757677787980
Installing and Configuring the SNMP Agent
SNMP Configuration and Management Manual—424777-006
2-21
Single-Node and Multiple-Node Scenarios
In Figure 2-3, SNMP agents on three different nodes process requests through the
same TCP/IP process. This type of configuration is possible only if there is at least one
TCP/IP subnet available for each SNMP agent running because a TCP/IP subnet can
be used by only one agent process at a time. Each SNMP agent must be reached
through a separate Internet address.
A disadvantage of this scenario is that \A and \C cannot be managed if \B fails.
Figure 2-3. Running SNMP Agents on Multiple Nodes
Note. YParallel Library TCP/IP and NonStop TCP/IPv6 do not support this configuration.
\B
\C
SNMP
Agent
\A
SNMP ManagerSNMP Manager
SNMP
Agent
SNMP
Agent
TCP/IP
Managed
Resources
Subagents
Managed
Resources
Subagents
Managed
Resources
Subagents
130.88.25.1
130.88.25.2
130.88.25.3
VST203.vsd