SPI Common Extensions Manual

ZCOM Event Messages
SPI Common Extensions Manual—427508-001
6-3
–3 ZCOM-EVT-SUMSTATE-CHG
ZCOM-TKN-NEW-PATH
identifies path used by the object following the switch. For valid values, see the
description of this token in ZCOM-TKN-NEW-PATH on page 4-8. Valid values are
the same as those for ZCOM-TKN-OLD-PATH.
ZCOM-TKN-PATH-SWITCH-CAUSE
indicates the reason for the path switch. For valid values, see ZCOM-TKN-PATH-
SWITCH-CAUSE on page 4-13.
Cause. The switch might be in response to an interactive command, a programmatic
request, or a software or hardware failure. The subsystem’s best guess is indicated by
the value of ZCOM-TKN-PATH-SWITCH-CAUSE.
Effect. The object is using the path specified in ZCOM-TKN-NEW-PATH.
Recovery. No recovery is necessary.
–3 ZCOM-EVT-SUMSTATE-CHG
An object is reporting a new summary state.
This event is not critical.
ZCOM-TKN-SUBJ-objtype
identifies the type of object that is reporting a new summary state (in the objtype
part of the name). The string value of this token is the name of the object.
ZCOM-TKN-OLD-OBJSTATE
identifies the previous summary state reported by the object. Valid values are the
same as those for ZCOM-TKN-OBJSTATE.
ZCOM-TKN-OBJSTATE
identifies the current summary state of the object. For valid values, see ZCOM-
TKN-OBJSTATE on page 4-9.
Tokens in Event Message
ZCOM-TKN-SUBJ-objtype <1> token-type ZSPI-TYP-STRING
ZCOM-TKN-OLD-OBJSTATE <2> token-type ZSPI-TYP-ENUM
ZCOM-TKN-OBJSTATE <3> token-type ZSPI-TYP-ENUM
ZCOM-TKN-OBJSTATE-CHG-CAUSE <4> token-type ZSPI-TYP-ENUM
Message Text
<1> state has changed from <2> to <3> <4>