SPI Common Extensions Manual

ZCOM Errors

SPI Common Extensions Manual—427508-001

A-38

–44 ZCOM-ERR-SWITCH-WRNG-RES (error)

The new resource specified in a SWITCH command (the resource to which the object

is to be switched) does not match the configured backup resource for the object. For

example, this error is issued if a SWITCH command specifying a new CPU 3 is issued

to an object running in CPU 1 with a configured backup in CPU 2.

ZCOM-TKN-OBJNAME

contains the name of the object that was to be switched and is always included in

the error list for this error.

ZCOM-TKN-OBJTYPE

contains the object type (ZCOM-OBJ-objtype) that was to be switched and is

always included in the error list for this error.

ZCOM-TKN-SWITCH-CPU

contains the erroneous new CPU specified in the SWITCH command. This token

must appear in the error list if CPU was the resource to be switched.

ZCOM-TKN-SWITCH-PATH

contains the erroneous new path specified in the SWITCH command. This token

must appear in the error list if path was the resource to be switched.

subsys-type-name

represents any number of subsystem-defined tokens described in the subsystem-

specific management programming manual.

Cause. The new resource specified in the command does not match the configured

backup resource for the command object.

Effect. The switch does not occur.

Recovery. Specify the valid backup resource in a new SWITCH command.

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING

ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-ENUM

ZCOM-TKN-SWITCH-CPU token-type ZSPI-TYP-INT

ZCOM-TKN-SWITCH-PATH token-type ZSPI-TYP-ENUM

subsys-type-name token-type subsys-defined

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL