SPI Common Extensions Manual

ZCOM Errors
SPI Common Extensions Manual—427508-001
A-44
–995 ZCOM-ERR-SERVNAME-INV (error)
Recovery. If this error recurs, contact a Compaq representative.
–995 ZCOM-ERR-SERVNAME-INV (error)
An invalid subsystem process name was specified by ZSPI-TKN-MANAGER,
ZCOM-TKN-XMGR, or ZCOM-TKN-OBJNAME.
Cause. The SCP process did not execute this command message because the
subsystem process specified by ZSPI-TKN-MANAGER, ZCOM-TKN-XMGR, or ZCOM-
TKN-OBJNAME did not exist or could not be opened.
Effect. The command is rejected.
Recovery. Correct the manager process name and reissue the request.
–996 ZCOM-ERR-SERV-ERR (error)
A subsystem returned an SPI error in response to a GETVERSION command issued
by the SCP process.
ZCOM-TKN-SERV-ERR
specifies the SPI error code returned by the subsystem.
Cause. The subsystem detected an SPI error while decoding or responding to the
GETVERSION command that the SCP process issues as part of its subsystem open
activity. SPI errors are generally caused by some problem with the SPI buffer format or
content, and are documented in the Guardian Procedure Errors and Messages
Manual .
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-ENUM
ZSPI-TKN-ENDLIST
Error Text
Invalid name specified in MANAGER or OBJNAME token
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZCOM-TKN-SERV-ERR <1> token-type ZSPI-TYP-INT
ZCOM-TKN-OBJNAME <2> token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-ENUM
ZSPI-TKN-ENDLIST
Error Text
Internal Error: SPI return code <1> received on initial
GETVERSION to <2>