SPI Common Extensions Manual

ZCDG Definitions
SPI Common Extensions Manual—427508-001
C-9
ZCDG Data Definitions
Z-BAKUP
contains the backup controller’s physical address.
ZCDG-TKN-DIAG-RESULT
ZCDG events use this token to provide additional information about the event. The
value of the token is a variable-length string that might contain any information relevant
to the event. The length of the string, expressed in bytes, is stored in the first byte of
the string, which is not included in the length computation.
ZCDG-TKN-DIAG-SRL-NUM
ZCDG events include this token to convey the controller serial number or tracking
number as read from the SEEROM or NVRAM in the controller.
ZCDG-TKN-DIAG-TEST
ZCDG events include this token to specify a particular diagnostic test. This token is
assigned values of the form ZCDG-VAL-ctlr-test, where ctlr identifies a
controller type and test specifies a test. Valid values and the tests they identify are:
token-code ZCDG-TKN-DIAG-RESULT
value ZCDG-TNM-DIAG-RESULT
token-type ZSPI-TYP-BYTESTRING
heading "Diagnostic-Results".
token-code ZCDG-TKN-DIAG-SRL-NUM
value ZCDG-TNM-DIAG-SRL-NUM
token-type ZSPI-TYP-CHAR16
heading "Controller-Serial-Number".
token-code ZCDG-TKN-DIAG-TEST
value ZCDG-TNM-DIAG-TEST
token-type ZSPI-TYP-ENUM
heading "Diagnostic Test".
ZCDG-VAL-CMFC-TEST1 Self-test on asynchronous line port 0
ZCDG-VAL-CMFC-TEST2 Self-test on asynchronous line port 1
ZCDG-VAL-CMFC-TEST3 Self-test on bit-synchronous line port 0
ZCDG-VAL-CMFC-TEST4 Self-test on bit-synchronous line port 1
ZCDG-VAL-CMFC-TEST5 Loopback test on asynchronous line port 0
ZCDG-VAL-LAN-TEST0 Channel and controller tests
ZCDG-VAL-LAN-TEST1 Channel tests
ZCDG-VAL-LAN-TEST2 Lockstep