SPI Common Extensions Manual

ZCDG Definitions
SPI Common Extensions Manual—427508-001
C-18
ZCDG Events
–10023 ZCDG-EVT-BOB-ERR-FRAME BOB error frame.
–10024 ZCDG-EVT-CLB-CMD-REJ CLB command rejected.
–10025 ZCDG-EVT-BOB-WARN BOB marginal warning.
–10026 ZCDG-EVT-NO-RSP No response event.
–10027 ZCDG-EVT-CLIP-ERR CLIP error detected.
–10028 ZCDG-EVT-CLIP-SUB-ERR Subdevice error detected.
Table C-2. ZCDG Event Messages, by Name
Event Number Description
ZCDG-EVT-BOB-ERR-FRAME –10023 BOB error frame.
ZCDG-EVT-BOB-WARN –10025 BOB marginal warning.
ZCDG-EVT-CIU-ERR –10022 CIU error detected.
ZCDG-EVT-CLB-CMD-REJ –10024 CLB command rejected.
ZCDG-EVT-CLIP-ERR –10027 CLIP error detected.
ZCDG-EVT-CLIP-PROBE-ERR –10021 CLIP probe error.
ZCDG-EVT-CLIP-SUB-ERR –10028 Subdevice error detected.
ZCDG-EVT-CTLR-DWLOAD –10006 IOP downloaded microcode to
controller.
ZCDG-EVT-DIAG-ERR –10020 Diagnostic error occurred.
ZCDG-EVT-DIAG-TEST –10018 Diagnostic test executed.
ZCDG-EVT-DIAG-UPDATE –10019 Controller software SEEROM
updated.
ZCDG-EVT-FUNC-ERR –10009 MFC function command error.
ZCDG-EVT-INTRPT-TIMEOUT –10004 No controller response to EIO
instruction.
ZCDG-EVT-INTRPT-UNEXP –10005 IOP detected unexpected
interrupt.
ZCDG-EVT-LOAD-VFU –10008 Load printer VFU.
ZCDG-EVT-MFC-HW-ERR –10013 MFC hardware error.
ZCDG-EVT-MFC-MODEM-STATUS –10015 MFC modem status.
ZCDG-EVT-MFC-RECV-FRAME-OVRUN –10016 MFC receive frame overrun.
ZCDG-EVT-MFC-SW-ERR –10014 MFC software error.
ZCDG-EVT-MFC-UNOWNED-EIO –10012 MFC unowned EIO.
ZCDG-EVT-NO-CTLR-BUF –10017 MFC no controller buffer.
ZCDG-EVT-NO-RSP –10026 No response event.
Table C-1. ZCDG Event Messages, by Number (continued)
Number Event Description