SPI Common Extensions Manual

ZCDG Definitions
SPI Common Extensions Manual—427508-001
C-22
–10003 ZCDG-EVT-PON-INTRPT
Cause. Some condition has required that the controller be reinitialized. The controller
might have lost the context within which it was communicating with an associated IOP,
or it might have suffered a nonrecoverable software error.
Effect. The controller is reinitialized.
Recovery. Examine the log for other events concerning the device. Look both before
and after the RESET-IO event. If events related to the device are markedly different
before and after the RESET-IO event, the problem was probably caused by software
and has been cleared up by the reset. If events indicate that the errors continue after
the reset, hardware is probably the source of the problem.
–10003 ZCDG-EVT-PON-INTRPT
A controller has been powered on.
ZEMS-TKN-EVENTNUMBER
has the value ZCDG-EVT-PON-INTRPT.
Cause. The IOP or driver associated with the controller has detected a power-on
interrupt.
Effect. The controller was powered on at the time indicated.
Recovery. No recovery is necessary.
Tokens in Event Message
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZEMS-TKN-SUBJECT-MARK token-type ZSPI-TYP-MARK
ZCOM-TKN-SUBJ-objtype token-type ZSPI-TYP-STRING
ZEMS-TKN-LDEVNAME <1> token-type ZSPI-TYP-FNAME32
Message Text
Controller Powered On. Device: <1>