SPI Common Extensions Manual

ZCDG Definitions
SPI Common Extensions Manual—427508-001
C-23
–10004 ZCDG-EVT-INTRPT-TIMEOUT
–10004 ZCDG-EVT-INTRPT-TIMEOUT
A controller has failed to respond to an EIO instruction.
ZCDG-TKN-EIO-CHNL-STATUS
contains the EIO channel status word.
ZEMS-MAP-EXIOADDR
contains the extended I/O address of the device associated with the event. If this
token is not present, ZEMS-TKN-CU is used.
ZEMS-TKN-CU
contains the controller and unit number of the device associated with the event.
This token is used in the absence of ZEMS-MAP-EXIOADDR.
ZCDG-TKN-IOC-STATUS
contains the I/O-control (IOC) status word.
ZCDG-TKN-EIO-LAC
contains execute I/O (EIO) load-address-and-command (LAC) word.
ZCDG-TKN-EIO-LPRM
contains the EIO load-parameter (LPRM) word.
Tokens in Event Message
ZCOM-TKN-SUBJ-objtype token-type ZSPI-TYP-STRING
ZEMS-TKN-LDEVNAME <1> token-type ZSPI-TYP-FNAME32
ZEMS-MAP-EXIOADDR <2> definition ZEMS-DDL-EXIOADDR
or
ZEMS-TKN-CU <3> token-type ZSPI-TYP-UINT
ZCDG-TKN-EIO-CHNL-STATUS <4> token-type ZSPI-TYP-INT
ZCDG-TKN-IOC-STATUS <5> token-type ZSPI-TYP-INT
ZCDG-TKN-EIO-LAC <6> token-type ZSPI-TYP-INT
ZCDG-TKN-EIO-LPRM <7> token-type ZSPI-TYP-INT
ZCDG-TKN-EIO-RDST <8> token-type ZSPI-TYP-INT
ZCDG-TKN-RESIDUE token-type ZSPI-TYP-INT
Message Text
Device: <1> timed out waiting for interrupt. <2> or CU: %<3>
Channel Status: <4>
IOC Status: <5>
LAC: <6>
LPRM: <7>
RDST: <8>