SPI Common Extensions Manual

ZCDG Definitions

SPI Common Extensions Manual—427508-001

C-33

–10018 ZCDG-EVT-DIAG-TEST

A diagnostic test was run on a subsystem component.

ZEMS-TKN-EVENTNUMBER

has the value ZCDG-EVT-DIAG-TEST.

ZCDG-TKN-DIAG-TEST

identifies the specific test that was run. For a list of tests, see ZCDG-TKN-DIAG-

TEST on page C-9.

ZEMS-TKN-DIAG-ERR

contains the error code. For a list of error codes, see the description of ZCDG-

TKN-DIAG-ERR on page C-6.

Cause. There was an operator request (through TMDS or Compaq TSM, for

example).

Effect. The controller is unavailable for communications until the tests are completed

and the controller is restarted.

Recovery. No recovery is necessary.

Tokens in Event Message

ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM

ZEMS-TKN-SUBJECT-MARK token-type ZSPI-TYP-MARK

ZCOM-TKN-SUBJ-objtype token-type ZSPI-TYP-STRING

ZCDG-TKN-DIAG-TEST <1> token-type ZSPI-TYP-INT

ZEMS-TKN-LDEVNAME <2> token-type ZSPI-TYP-FNAME32

ZEMS-TKN-DIAG-ERR token-type ZSPI-TYP-STRUCT

.Z-ERRTYPE <3> type ZSPI-DDL-UINT

.Z-ERRCODE <4> type ZSPI-DDL-UINT

.Z-AUXCODE <5> type ZSPI-DDL-UINT

Message Text

Diagnostic test <1> was executed on <2>.

Type: <3>

Error: <4>

Aux: <5>