SPI Common Extensions Manual

ZCDG Definitions
SPI Common Extensions Manual—427508-001
C-38
–10026 ZCDG-EVT-NO-RSP
ZEMS-TKN-EVENTNUMBER
has the value ZCDG-EVT-BOB-WARN.
ZCDG-TKN-BOB-SRC
identifies the BOB source. For valid values and their meanings, see ZCDG-TKN-
BOB-SRC on page C-2.
ZCDG-TKN-BOB-SENSE
conveys the value of the BOB power supply.
Cause. The BOB’s power supply or fan might be failing.
Effect. The hardware is not reliable.
Recovery. Replace the board.
–10026 ZCDG-EVT-NO-RSP
The device did not respond to a probe.
ZEMS-TKN-EVENTNUMBER
has the value ZCDG-EVT-NO-RSP.
Cause. There is a hardware fault.
Effect. The CLIP stops.
Recovery. Run loopback tests.
Message Text
BOB marginal functional errors detected on <1>
BOB source: <2>
Measured value of power supply: <3>
Tokens in Event Message
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZEMS-TKN-SUBJECT-MARK token-type ZSPI-TYP-MARK
ZCOM-TKN-SUBJ-objtype token-type ZSPI-TYP-STRING
ZEMS-TKN-LDEVNAME <1> token-type ZSPI-TYP-FNAME32
Message Text
No response to probe on <1>