Spooler Plus Programmer's Guide

Spooler Procedure Calls
Spooler Plus Programmer’s Guide—522293-003
4-45
SPOOLERSTATUS2 Procedure
specifies the spooler component whose status is being sought. The range of
values and their meanings are listed in Table 4-11.
scan-type input
INT:value
specifies the type of scan desired as follows:

Bit 0 is used for the owner IDs that are to be selected:
0 = All owner IDs.
1 = Only the specified owner ID.

Bit 1 is used for selection criteria of items to be presented:
0 = All items.
1 = Only the specified items.

Bit 15 is used for the sequence in which items are to be presented:
0 = Status of the item specified in status-buffer.
1 = Status of the item that follows the item specified in status-buffer.

Bits 2 through 14 are reserved for future use.
Table 4-11. SPOOLERSTATUS2 Command Codes
Command
Code Component
1Device
3Location
5 Print process
10 Cross-reference by location
11 Cross-reference by device
12 Cross-reference by print process
13 Font information
17 Job
18 Collector
19 Spooler
20 Jobs on a particular device queue
21 Occurrences of a particular job
22 Jobs with a particular location
23 Batch information
24 Statistics
25 Collector LISTOPENS data