Spooler Plus Programmer's Guide

Spooler-Related Errors
Spooler Plus Programmer’s Guide—522293-003
C-12
Print Procedure Errors
Recovery. Refer to the information on file-system errors in the Guardian Procedure
Errors and Messages Manual for corrective action for the error number indicated in bits
<8:15>.
Cause. There was a file-system error on a file to the print process.
Effect. The spooler ignores your request.
Recovery. Refer to the information on file-system errors in the Guardian Procedure
Errors and Messages Manual for corrective action for the error number indicated in bits
<8:15>.
Cause. A parameter is missing.
Effect. The print procedure ignores your command.
Recovery. Correct the syntax and reenter the command.
Cause. A parameter is in error.
Effect. None.
Recovery. Correct the parameter value and reenter the command.
Cause. A print procedure reached the end of the file.
Effect. If this error code is returned by the PRINTREAD procedure, all lines in the job
have been transferred.
Recovery. Send an “end job” message to the supervisor, using the PRINTSTATUS
procedure, to delete the job.
Cause. A print procedure reached the end of the copy.
Effect. If this error code is returned by the PRINTREAD procedure, the next line
returned is the first line of the next copy of the job. The data line does not contain valid
data when PRINTREAD returns an end-of-copy indication.
2560-2815 (%5000 - %5377)
4096 (%10000)
4097 (%10001)
5120 (%12000)
5121 (%12001)