Spooler Plus Utilities Reference Manual

Spoolcom
Spooler Plus Utilities Reference Manual—522294-002
3-18
COLLECT Command
Examples for All Users
1. To show the status of all collectors on the system, enter
The following information is displayed:
Table 3-6. COLLECT STATUS DETAIL Display Entries
Entry Description
STATE See the explanation of STATE in Table 3-5
.
LAST ERROR Is the octal number of the last error printed to the error log.
This value can be %1000, %2000, %3000, %4000, or %5000
plus a file-system error number, or %100000 plus a
NEWPROCESS error number. The octal error number is a
16-bit value where bits 8 through 15 contain the file-system
error number.
PROGRAM FILE Is the name of the collector process program file.
CPU See the explanation of CPU in Table 3-5
.
BACKUP Is the number of the processor where the backup process
runs.
PRIORITY Is the execution priority at which the collector process runs.
DATA FILE See the explanation of DATA FILE in Table 3-5
.
PAGESIZE Is the job default page size.
UNIT SIZE See the explanation of UNIT in Table 3-5
.
ALLOCATED UNITS Is the current number of units allocated. This number, when
multiplied by 1024 bytes, is the total amount of disk space
currently allocated to jobs.
TOTAL UNITS Is the total number of units available. This number, when
multiplied by 1024 bytes, represents the total amount of disk
space available for job data on the collector data file.
PERCENT FULL See the explanation of %FULL in Table 3-5
.
OPENERS Shows the number of applications that have an outstanding
open to the collector.
LARGE BUFFER SIZE Displays the size of the largest internal buffer in the collector.
This value is fixed and can range from 1024 bytes to 4096
bytes (in increments of 1024).
)COLLECT, STATUS
COLLECT STATE FLAGS CPU PRI UNIT DATA FILE %FULL
$C ACTIVE 3 ,10 146 16 $ACC.SPOOLER.DATA 0
$G ACTIVE 4 , 5 146 8 $PUB.SPOOLER.DATA 5
)