Spooler Plus Utilities Reference Manual

Spoolcom
Spooler Plus Utilities Reference Manual—522294-002
3-57
JOB Command
Status of a Single Job
If the status of a single job is requested and the job is in the ready or print state, the
following display is also shown:
JOB LOCATION DEVICE SEQ COPY PAGE
Table 3-13 describes the JOB STATUS display entries for a single job.
Table 3-12. JOB STATUS Display Entries
Entry Description
JOB Is the job number.
Is the batch number. If the job is not part of a batch job, this field
is blank.
Is the state of the job:
BATCH
ST
RD Spooler has finished collecting; job is queued and
waiting to print.
HL The hold-before-printing flag is on or the hold-after-
printing flag is on and the job has printed.
OP Job is still being collected by the spooler.
PR Job is currently printing.
WT Job is waiting for a device queue node.
FLAGS is any or all of the following:
0-7 Job selection priority.
A Hold after on.
B Hold on (but job is still open).
X Job is bad (examples: TGAL abended while spooling
the job, or the job was spooled at level 3, but the
collector process was closed before calling
SPOOLEND).
OWNER
Is the job owner in the form group-number,user-number.
TIME Is the month and day of job creation, that is, when the job was
sent to the spooler. If it was today, the time is given in
hour:minute form instead.
COPY Is the number of copies to be printed.
PAGE Is the number of pages in the job.
REPORT Is the job report name.
LOCATION Is the location assigned to the job.