Spooler Plus Utilities Reference Manual

Spoolcom
Spooler Plus Utilities Reference Manual—522294-002
3-69
LOC Command
Table 3-15 describes the LOC STATUS display entries.
Examples for All Users
1. If you send your job to a real location, as in this example, the XREF option reveals
the device name and print process name associated with it:
The following information is displayed:
2. If you send your job to a location that does not exist, there is no device or print
process associated with that fictitious location:
Examples for Authorized Users
1. The following command connects device $LP to the location #PRIN.DEFAULT:
)LOC #PRIN.DEFAULT, DEV $LP
2. The following command deletes location #LP8 from the spooler:
)LOC #LP8, DELETE
Table 3-15. LOC STATUS Display Entries
Entry Description
LOCATION Is the #group.dest whose status is being displayed.
FLAGS Displays a B if broadcast is on.
DEVICE Is the device associated with the location, if any.
FONT Defines a special control job in the spooler. The special control job
might consist of downloadable vertical forms control (VFC) command or
possibly a special header page.
JOB Is the job numbers of all jobs at that destination.
SEQ Is the job position in that destination queue.
COPY Is the number of copies to be printed.
PAGE Is the number of pages in that job.
BROADCAST Is ON or OFF.
FONT NAME Identifies the particular font associated with this location.
)LOC #LPR1, XREF
LOCATION DEVICE PRINT PROCESS
#LPR1.DEFAULT $LP1 $SPLA
)LOC #LOOK, XREF