Spooler Plus Utilities Reference Manual

Spoolcom
Spooler Plus Utilities Reference Manual—522294-002
3-88
SPOOLER Command
Example for All Users
1. Using the SPOOLER command, you can obtain the status of your spooler:
The following information is displayed:
2. Use the STATUS DETAIL command to determine whether manager access is
available:
The following information is displayed:
Example for Authorized Users
You use the SPOOLER command to start the spooler, including any collectors and
print processes associated with it, and to specify manager access if that feature is
used at the site:
COLD
This state indicates the starting of a new
spooler
.
LOGGING FILE
Is the spooler error log file.
LAST ERROR Is the octal number of the last error sent to the error log
file. Bits 8 through 15 contain the octal file-system error
number. All of the file-system errors are described in the
Guardian Procedure Errors and Messages Manual.
)SPOOLER
SPOOLER STATE LOGGING FILE LAST
ERROR
$SPLS ACTIVE $0
)SPOOLER, STATUS DETAIL
SPOOL SUPERVISOR: $SPLS
STATE: ACTIVE
MGRACCESS: ON
LOG FILE: $0
LAST ERROR: NONE
)SPOOLER, START, MGRACCESS ON
Table 3-19. SPOOLER STATUS Display Entries
Entry Description