Spooler Plus Utilities Reference Manual

Peruse Messages
Spooler Plus Utilities Reference Manual—522294-002
B-3
Cause. The Guardian OPEN procedure returned file-system error number when you
attempted to open a data file for the current job.
Effect. Peruse does not open the data file.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
corrective action for the file-system error number.
Cause. The Guardian EDITREAD procedure returned file-system error number when
it attempted to read a command file that is in the EDIT format.
Effect. Peruse cannot read the command file.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
corrective action for the file-system error number.
Cause. The Guardian EDITREADINIT procedure returned file-system error number
when it attempted to read a command file that is in EDIT format.
Effect. Peruse cannot use the command file.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
corrective action for the file-system error number.
Cause. An attempt was made to delete a job that had not finished spooling. Peruse
shows the job state as open.
Effect. The job is not deleted.
Recovery. Place the job on hold, if necessary, so it will not print when spooling is
complete. Later, return to Peruse, remove the hold, and delete the job. If the job
never finishes spooling, contact your system operator for assistance in deleting the job.
DATA FILE OPEN FAILED, ERROR: number
EDITREAD ERROR: number
EDITREADINIT ERROR: number
ENTRY IN USE