Spooler Plus Utilities Reference Manual

Peruse Messages
Spooler Plus Utilities Reference Manual—522294-002
B-5
Cause. A PAGE command was entered with an illegal page-number parameter.
Effect. The spooler does not execute this command.
Recovery. Check your syntax, then reenter this command with the correct page
number.
Cause. A command with an illegal parameter value was entered.
Effect. The spooler does not execute your command.
Recovery. Check your syntax, and then reenter this command with the correct
parameter value.
Cause. A Peruse or Peruse OPEN command specified either no supervisor name or
one that is not a valid process name.
Effect. You cannot obtain information about spooler jobs unless Peruse establishes
communication with a supervisor process.
Recovery. Check your syntax, then reenter your command with the correct supervisor
process name in remote or local form.
Cause. During an input/output (I/O) operation to the Peruse command file, file-system
error number occurred.
Effect. Peruse does not read the next command line.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
corrective action for the file-system error number.
Cause. The job number entered is outside the range 1 through 4095.
Effect. Peruse does not execute the command.
Recovery. Check your job number, and then reenter your command.
ILLEGAL PAGE NUMBER
ILLEGAL PARAMETER
ILLEGAL SUPERVISOR PROCESS NAME
INPUT FILE ERROR: number
INVALID JOB NUMBER SPECIFIED