Spooler Plus Utilities Reference Manual

Peruse
Spooler Plus Utilities Reference Manual—522294-002
2-10
BATCH Command
BATCH Command
The BATCH command causes the specified batch job to become current.
batch-number
is the number of a batch job that you own. Unless you log on as the super ID
(255,255), you are not permitted to affect another user’s batch job. The batch job
specified by batch-number becomes current.
Considerations
•
Once a batch job is current, most subsequent commands are applied to all the jobs
in the batch job.
•
The batch job remains current until it is deleted, another batch job is chosen, or a
JOB command is issued.
Example
The following Peruse display shows that jobs 1167, 1289 (part of batch 555), and 1200
are all in the READY state:
The following BATCH command makes batch 555 current; then the LOC command
changes the location where the batch job is to be printed:
STATUS Monitors and displays the status of jobs in the system.
UNLINK Dissociates the specified spooler job from the current batch job.
VOLUME Sets the current default volume and subvolume used by Peruse.
BATCH batch-number
PERUSE - T9101D48 - (30MAR2001) SYSTEM \WEST
Copyright Tandem Computers Incorporated 1978, 1982, 1983,
1984, 1985, 1986, 1987, 1988, 1989, 1989, 1991
JOB BATCH STATE PAGES COPIES PRI HOLD LOCATION REPORT
1167 555 READY 1 1 4 #BATCH STEVEW
1200 READY 3 1 4 #ANOTHERFILE STEVEW
1289 555 READY 430 1 4 #CHECK.TACL STEVEW
_
_BATCH 555
_LOC #LP2X
Table 2-2. Summary of Peruse Commands (page 2 of 2)
Command Function