Spooler Plus Utilities Reference Manual

Peruse
Spooler Plus Utilities Reference Manual—522294-002
2-11
COPIES Command
To see the status of the current job, enter a JOB command:
Peruse then displays the following:
After you set the current batch, Peruse identifies jobs in this batch in subsequent
displays with a B to the left of the job numbers. In the example above, jobs 1167 and
1289 are in the current batch (555).
COPIES Command
The COPIES command alters the number of copies for the current job. If there is no
current job, then the job most recently spooled job becomes the current job.
number-of-copies
is the number of copies of the current job to be printed. The value is a number
from 1 through 32767. The default is 1.
Considerations
•
When a job is added to the spooler subsystem, the number of copies is 1.
•
For each copy you request, a separate header page also prints (if that printer has
the header bit turned on).
•
If a batch job is current, the COPIES command operates on all jobs that are part of
the current batch job.
•
The COPIES command is not supported if the current job is a spooler job file.
_JOB
JOB BATCH STATE PAGES COPIES PRI HOLD LOCATION REPORT
B 1167 555 PRINT 1 1 4 #LP2X STEVEW
1200 READY 3 1 4 #ANOTHERFILE STEVEW
B 1289 555 READY 430 1 4 #LP2X STEVEW
_
COPIES number-of-copies