Spooler Utilities Reference Manual

Spoolcom
Spooler Utilities Reference Manual—522295-003
4-53
JOB Command
Status of a Single Job
If the status of a single job is requested and the job is in the ready or print state, the
following display is also shown:
JOB LOCATION DEVICE SEQ COPY PAGE
Table 4-11 describes the JOB STATUS display entries for a single job.
FLAGS is any or all of the following:
0-7 Job selection priority.
A Hold after on.
B Hold on (but job is still open).
X Job is bad (examples: TGAL abended while spooling
the job, or the job was spooled at level 3, but the
collector process was closed before calling
SPOOLEND).
OWNER
Is the job owner in the form group-number,user-number.
TIME Is the month and day of job creation, that is, when the job was
sent to the spooler. If it was today, the time is given in
hour:minute form instead.
COPY Is the number of copies to be printed.
PAGE Is the number of pages in the job.
REPORT Is the job report name.
LOCATION Is the location assigned to the job.
Table 4-11. JOB STATUS Display Entries—Non-Detailed Single Job Status
Entry Description
JOB Is the job number.
LOCATION Is the complete location (#group and destination) for the job.
DEVICE Is the name of the device that will print or is printing the job.
SEQ Is the job sequence number in the device queue. PRINT is displayed
if the job is printing.
COPY Is the number of copies to be printed.
PAGE Is the number of pages in the job.
Table 4-10. JOB STATUS Display Entries (page 2 of 2)
Entry Description