SQL/MP Messages Manual

SQLCI Utility Processor Messages (9000 to 9999)
HP NonStop SQL/MP Messages Manual—427720-006
11-80
SQL 9912
Cause. The name specified for a node could not be translated into a node number.
Effect. The command fails. No modification is done.
Recovery. Verify that the node name is correct and is specified correctly in the
MODIFY DICTIONARY command. Specify the node name with the leading backslash
and without a space before the name. If both the name and number are specified, they
must be separated by a comma and enclosed in parentheses.If the command is
intended for systems which are not recognized in the network then use only node
numbers.
SQL 9913
Cause. When both the name and the number of a node are specified, the name is
checked to make sure it corresponds to the specified node number. This test failed.
Effect. The command fails. No modification is done.
Recovery. Correct the node name or node number and reissue the MODIFY
DICTIONARY command, or if the command is intended for the systems which are not
recognized in the network then use only node number.
SQL 9914
Cause. Both the node name and the node number are specified in the MODIFY
LABEL command and both of them are not recognized in the network.
Effect. Node name specified is ignored.
Recovery. No recovery is required.
If the command is intended for systems which are not recognized in the network then
use only node numbers to avoid this message.
9912 An error occurred during an attempt to translate the
node name specified in the MODIFY DICTIONARY command into a
node number.
9913 An error occurred in the attempt to translate the
specified node name into the specified node number in a
MODIFY DICTIONARY command.
9914 The system value-1 is not recognised hence the name
value-1 is ignored.