SQL/MP Messages Manual

SQLCI Messages (10000 to 10999)
HP NonStop SQL/MP Messages Manual—427720-006
12-3
SQL 10009
Cause. The SQLCI limit for nested OBEY command files was exceeded. It cannot
open more than four nested OBEY command files.
Effect. The OBEY command fails.
Recovery. Rearrange your OBEY command files so that there are no more than four
nested OBEY command files and try again.
SQL 10010
Cause. The SQLCI RUN command limit of 132 characters was exceeded. The error
might be a syntax error in the SQLCI command string entered as part of the SQLCI
RUN command.
Effect. One or more parameters are ignored.
Recovery. Check the command syntax. If all SQLCI commands in the SQLCI RUN
command are necessary, put them in an OBEY command file. Specify the OBEY
command file as an input file in the SQLCI RUN command.
SQL 10011
Cause. SQLCI could not clear an EDIT file, probably because another user opened
the file.
Effect. The file is not cleared.
Recovery. Close the file and reissue the command later.
SQL 10013
Cause. An SQLCI command exceeded the limit of 132 characters.
Effect. The command fails.
Recovery. Check the command syntax, and specify a shorter command string.
10009 File value-1 cannot be opened because OBEY files can be
nested only to a depth of four.
10010 Parameter string on the run command was truncated to
132 characters.
10011 Unable to CLEAR file value-1.
10013 The command is too long.