SQL/MP Messages Manual

SQLCI Messages (10000 to 10999)
HP NonStop SQL/MP Messages Manual—427720-006
12-80
SQL 10710
Cause. Invalid syntax was given for LOC option.
Effect. The command fails.
Recovery. Enter a valid LOC name. The LOC name must start with a number sign (#).
The name can contain alphabetic or numeric characters in any combination, except
that the character after the # must be alphabetic.
SQL 10711
Cause. A name with more than 8 characters was used for either the group name or
the destination name in the LOC option.
Effect. SQLCI uses the first 8 characters from input name(s) and ignores the rest.
Recovery. Informational message only; no corrective action is needed.
SQL 10712
Cause. A name with more than 16 characters was used for the option name.
Effect. SQLCI uses the first 16 characters from your input and ignores the rest.
Recovery. Informational message only; no corrective action is needed.
SQL 10713
Cause. The value for the SPOOL3 option was not in the valid range.
Effect. The command fails.
Recovery. Reissue the command with a correct value.
10710 Invalid LOC option name.
10711 The length of LOC name is too long. SQLCI only uses
the first 8 characters from each name.
10712 The length of the option name is too long. SQLCI only
uses the first 16 characters.
10713 Value must be between 1 and 32767.