SQL/MX 2.x Messages Manual (G06.24+, H06.03+)

Utility Messages (20000 through 23099)
HP NonStop SQL/MX Messages Manual—523730-004
17-107
Where value is always 0 to indicate the corrupt bit is cleared.
Cause. The “-rc” option was used with the FIXUP utility to reset the corrupt bit on a file
where the corrupt bit is not currently set.
Effect. None. This is a warning.
Recovery. No recovery is necessary.
SQL 20857
Where file-name is the Guardian file-name of the SQL/MX object.
Where time is the current redefinition timestamp associated with the SQL/MX object.
Cause. The “-rt” option was used with the FIXUP utility to set the correct redefinition
timestamp for an SQL/MX object, but the time was already the same time recorded in
the file label for the object.
Effect. None. This is a warning.
Recovery. No recovery is necessary.
SQL 20858
Where file-name is the Guardian file-name of the SQL/MX object.
Cause. You attempted to specify the FIXUP utility on a file that exists on a remote
node.
Effect. The operation fails.
Recovery. You must run the FIXUP utility on the remote node.
SQL 20859
Cause. An internal error occurred.
Effect. The operation fails.
Recovery. None. Contact your service provider.
20857 FIXUP did not change the redefinition timestamp for
file file-name. It is already set to the correct value of
time.
20858 File file-name is located on a remote node. The current
FIXUP operation cannot be performed remotely.
20859 An internal FIXUP error occurred.