SSH Reference Manual

The default value is 1000, i.e. the line numbers are incremented by 1)

Examples

Increment by 0.003:

SFTPEDITLINENUMBERDECIMALINCR 3

Increment by 0.1:

SFTPEDITLINENUMBERDECIMALINCR 100

Considerations

• The setting of this parameter is only relevant if parameter SFTPEDITLINESTARTDECIMALINCR

is set to a

number between 0 and 99999999.

• Previously, all Guardian edit files were written starting with line number 1 and increment 1.000, which allowed

a maximum of 99999 lines. This behavior is still the default.

• The default increment (1.000) is used for all lines less than the value of parameter

SFTPEDITLINESTARTDECIMALINCR

. In order to get the same result as the NonStop FTP server the

parameter SFTPEDITLINENUMBERDECIMALINCR must be set to 100 and the value of

SFTPEDITLINESTARTDECIMALINCR to 40000000.

• This parameter is only considered when a Guardian edit file is written, i.e. either if a remote sftp client issues a

put command to the SSH2 server on NonStop specifying a Guardian destination file with code 101 or if a sftp

client on a NonStop server issues a get command specifying a local Guardian destination file with file code 101.

• If a get command is executed by a sftp client on the NonStop server, then the parameter must be set in the

environment of the sftp client (as PARAM for SFTP running in the Guardian environment or as environment

variable for SFTPOSS running in the OSS environment).