Manualshelf

SSH Reference Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
111112113114115116117118119120
SOCKTCPMINRXMT
Use this parameter to control the minimum time for TCP retransmission timeout. When setting this parameter to a non-
zero value the specified parameter is used on socket level.
Parameter Syntax
SOCKTCPMINRXMT time
Arguments
time
A number representing the minimum time for TCP retransmission timeout. A value of 0 means the minimum
time for TCP retransmission timeout configured in the TCP/IP monitor process is used.
Considerations
• Normally the value configured on TCP/IP monitor process level (TCP-MIN-REXMIT-TIMEOUT) should be
sufficient, i.e. the default value should be used for parameter SOCKTCPMINRXMT. See document "HP
NonStop TCP/IPv6 Configuration and Management Manual" for details.
• The Cluster I/O Protocols (CIP) subsystem does not support the corresponding socket option TCP_MINRXMT,
i.e. the default value must be used for parameter SOCKTCPMINRXMT if CIP is involved. See document "HP
NonStop TCP/IPv6 Configuration and Management Manual" for details.
Default
The default is 0.
SOCKTCPMAXRXMT
Use this parameter to control the maximum time for TCP retransmission timeout. When setting this parameter to a non-
zero value the specified parameter is used on socket level.
Parameter Syntax
SOCKTCPMAXRXMT time
Arguments
time
A number representing the maximum time for TCP retransmission timeout. A value of 0 means the maximum
time for TCP retransmission timeout configured in the TCP/IP monitor process is used.
Considerations
• Normally the value configured on TCP/IP monitor process level (TCP-MAX-REXMIT-TIMEOUT) should be
sufficient, i.e. the default value should be used for parameter SOCKTCPMAXRXMT. See document "HP
NonStop TCP/IPv6 Configuration and Management Manual" for details.
• The Cluster I/O Protocols (CIP) subsystem does not support the corresponding socket option
TCP_MAXRXMT, i.e. the default value must be used for parameter SOCKTCPMAXRXMT if CIP is involved.
See document "HP NonStop TCP/IPv6 Configuration and Management Manual" for details.
Default
The default is 0.
HP NonStop SSH Reference Manual Configuring and Running SSH2 • 117