SSH Reference Manual

INFO PROCESS
INFO PROCESS displays the setting of global parameters. The following example shows a typical result:
Config \BWNS02.$ZPTYK 075536 T0801H01_22JAN2014_ABK LG:18DEC2013_223018
AUDITCOLL OFF AUDITING OPTIONAL
AUTODEL_WAIT 3 BANNER Y
BANNER_TIMEOUT 0 BREAK_ON_DISCON N
C12_ALWAYS Y CHOICE_PROMPT Y
CHOICE_ROW 0 CONN_CLR_SSH N
CONN_CLR_TELNET Y DEV_SUBTYPE B05COMP
DYNAMIC_PRI 149 DYN_CPU (0,15)
DYN_WIN_MAX 100000 EMS_3270_CONN OFF
FESESSDOWN 140 IDLE_WARNING 2
INPUT_TIMEOUT 0 KEEPALIVE Y
KILL_DYNAMIC N LUNAME_ECHO N
MAX_OPENERS 32 MAX_OUTQ 0
NBOT Y NBOT_TIMEOUT 8
NEGOT_TIMEOUT 20 NODE NAME \BWNS02
OPENER_WAIT 30 OUTPUT_RESET Y
RECV_SIZE 1000 REPLY_DELAY_MAX 2
RFC860TM 0 RSCMGR_DEPTH 3
SEM2_SEGID_FIRST 900 SEM2_SEGID_LAST 950
SEM2_SEG_SIZE 130048 SEM2_SEND_MAX 4000
SEM2_TIMEOUT 600 SEND_LIMIT 30000
SEND_Q_MAX 20 SEND_TIMEOUT 120
SPI Y SSH_DEFAULT_SVC *NONE*
SSL_OBJECT STNSSL TERMID_RFID N
3270_IN_SIZE 2000 3270_MORE_TO 5
3270_SKIP_NEGOT N 3270_TM_BLOCK 10
3270_TM_TO 2 WELCOME_SEQ BEFORE
UAIPADDR N WIN_AVAIL_C11 Y
WIN_AVAIL_ALWAYS N WIN_SCRIPT_FIRST Y
WSINFO NONE
CHOICE_TEXT "\nEnter Choice> "
STNCOM_PROMPT ""
TERMID_FILE OFF
WELCOME OFF
HP Build of STN, no license needed. Allows umlimited PTY/SSH sessions
SAFECOM INFO DISKFILE STN PRIV-LOGON ON
GWN disabled, using #ZWNnnnn for session/window names
GWN^FILE
GWN^BLOCKSIZE 25
GWN prefix len 4
GWN num digits 4
GWN next window #ZWN0001
GWN last window #ZWN0000
SSL vproc (none)
SSH vproc (none)
Process Startup Params
PARAM BACKUPCPU ANY
Note: Some commands displayed are not supported in HP T0801, for example CONN_CLR_TELNET and
3270_IN_SIZE. These commands are not documented in this manual and should not be used by HP T0801 users.
Comments
Config \BWNS02.$ZPTYE 075536 T0801H01_24JAN2013_ABE LG:04JAN2013_230358
Expand node name, STN process name, system serial number, STN vproc and LINKGMT.
SSH vproc T9999H06_22Nov2010_comForte_SSH2_0089
This displays (none) until the first SSH session connects to STN, thereafter the VPROC of the SSH process.
Process Startup Params
If STN was started without params, displays
... no PARAMs ...
HP NonStop SSH Reference Manual STN Reference • 267