SSH Reference Manual

Starting with STN version B08, trace files will include INFO STN output at the beginning.
Warning: Tracing can noticeably affect response time and CPU usage.
UAIPADDR Y | N
STNCOM command UAIPADDR controls the inclusion of the workstation remote IP address on
USER_AUTHENTICATE_ calls. This IP address is included in certain Safeguard records. UAIPADDR should only be
used on Guardian releases H06.26 (or later) or J06.15 (or later). Using the parameter on earlier releases will cause an
abend of the STN process and a ZZSA dump file created in the STN object file subvol. STN formerly used
PROCESSOR_GETINFOLIST_ items 3 and 60 to retrieve the Guardian version number, but in certain cases the
reported version number can be incorrect, leading to an STN abend.
UAIPADDR N (default) omits the IP address on USER_AUTHENTICATE_ calls. Safeguard records will not include
the IP address. This can safely be used on all Guardian releases.
UAIPADDR Y includes the IP address on all USER_AUTHENTICATE_ calls without regard for the Guardian version.
Safeguard records will include the IP address. If UAIPADDR Y is used on Guardian releases earlier than H06.26 or
J06.15, STN will abend.
Notes:
• On Guardian Gxx releases (S-Series hardware), STN never includes the IP address on
USER_AUTHENTICATE_ calls regardless of UAIPADDR setting.
• STN only calls USER_AUTHENTICATE_ for (a) SSH sessions configured with *MENU* and (b) Telnet
sessions using a SERVICE with LOGON REQ.
VERSION
VERSION displays the process name and cpu, pin, revision number and revision date of STN. There are no parameters.
Starting with SPR T0801^ABE the following items are displayed: Version, Vproc, Link gmt (build timestamp), Program
object file name and type, Node name, Process name and cpu,pin, process start time, Time running, Backup cpu,pin,
Time of last backup takeover, and number of takeovers.
WELCOME <filename> | OFF | LIST
Displays the contents of an edit file to be displayed at session startup before the STN02 Services menu.
<filename>
Loads specified edit-101 file as welcome text. Text is limited to displayable ascii characters (hex 20-7e), 79 columns per
line, and 50 lines. The text is saved in STN memory and the file is closed.
OFF
Turns off welcome
LIST
Displays current welcome text
INFO STN will show the status of WELCOME, but not the text.
WELCOME_SEQ BEFORE | AFTER | BOTH
WELCOME_SEQ controls the sequence of the WELCOME display relative to the Enter Choice> prompt. The default
setting is BEFORE, which displays the WELCOME text before the Enter Choice> prompt. AFTER displays the
WELCOME text after the response to the Enter Choice> prompt. BOTH displays the WELCOME in both places.
HP NonStop SSH Reference Manual STN Reference • 281