SSH Reference Manual

• EFFECT: The affected terminal session may hang.
• RECOVERY: None. Recovery is automatic. If other symptoms are noted, such as hanging sessions, include this
EMS event when reporting the problem. Recovery is automatic.
zstn-evt-gwn-file-err value is 1058
"<1> GWN File <2> error <3> on <4>"
<2> - GWN file name
<3> - Guardian file error code
<4> - File operation where error occured
• CAUSE: An error occured on the GWN file.
• EFFECT: STN will attempt to recover. Additional related EMS event(s) will give further information.
• RECOVERY: None, but see additional EMS events.
zstn-evt-gwn-file-created value is 1059
"<1> GWN File <2> Created"
<2> - GWN file name
• CAUSE: STN created a new GWN file based in GWN^FILE because the file did not already exist.
• EFFECT: GWN startup continues.
• RECOVERY: None; informational.
zstn-evt-gwn-file-init value is 1060
"<1> GWN File <2> Initialized to <3>"
<2> - GWN file name
<3> - Window name
• CAUSE: STN created a new GWN file
• EFFECT: The GWN file is initialized to the specified window name.
• RECOVERY: None; informational.
zstn-evt-gwn-file-bad-data value is 1061
"<1> GWN File <2> contains bad data <3>"
<2> - GWN file name
<3> - Sample of bad data
• CAUSE: STN encountered unexpected data in the GWN file.
• EFFECT: GWN is disabled.
• RECOVERY: Correct the problem with the file, purge the file, or change PARAM GWN^FILE to the proper
filename, then restart STN.
290 • STN Reference HP NonStop SSH Reference Manual