SSH Reference Manual

zstn-evt-backup-stopped value is 7
"<1> Backup stopped"
• CAUSE: The STN backup process stopped. Another EMS event may give additional information.
• EFFECT: STN runs without a backup. In some cases, STN will automatically restart the backup process
immediately or after a backup CPU becomes available.
• RECOVERY: If backup operation is required, make the backup CPU available or use the STNCOM command
BACKUPCPU to select another backup CPU.
zstn-evt-backup-start-err value is 8
"<1> Backup create error <2> <3>"
<2> error code
<3> detail error
• CAUSE: STN could not create a backup process due to a process_create_ error.
• EFFECT: STN runs without a backup. In some cases, STN will automatically restart the backup process
immediately or after a backup CPU becomes available.
• RECOVERY: If backup operation is required, make the backup CPU available or use the STNCOM command
BACKUPCPU to select another backup CPU.
zstn-evt-misc value is 9
"<1> <2>"
<2> Text. There are several variations of this event; currently, only one is listed.
"STN requires SAFECOM ADD DISKFILE <file-name>,PRIV-LOGON ON but it is <error-text> "
<file-name> - the STN object file name
<error-text> - could be:
Safeguard not running
Not configured
DISKFILE record not found
DISKFILE PRIV_LOGON OFF
• CAUSE: STN object not properly configured under Safeguard.
• EFFECT: STN cannot start dynamic service applications when SERVICE USER or LOGON is used.
• RECOVERY: Start Safeguard, then perform the following Safecom command for the STN object file:
ADD DISKFILE <stn-object-filename>,
PRIV-LOGON ON
This command can be performed when STN is running and takes effect immediately.
zstn-evt-checkalloc value is 10
HP NonStop SSH Reference Manual STN Reference • 293